Hardwick Gas Stove Thermo Coupler

Hardwick Gas Stove thermo coupler

Carol -- Monday, 17 September 2001, at 6:39 p.m.

I live in Canada and have been told I cannot get the parts for a 1966-68 Hardwick Gas Stove. I need a thermo coupler and an oven valve. If anyone knows where these can be obtained or if they are definitely not available (Canada or US) or if there is something that can be used as a substitue I would appreciate hearing from you.

Thanks

Re: Hardwick Gas Stove *LINK* *PIC*

Dan O. -- Monday, 17 September 2001, at 8:50 p.m.

: I live in Canada and have been told I cannot
: get the parts for a 1966-68 Hardwick Gas
: Stove. I need a thermo coupler and an oven
: valve. If anyone knows where these can be
: obtained or if they are definitely not
: available (Canada or US) or if there is
: something that can be used as a substitute I
: would appreciate hearing from you.

: I have been told I cannot get the parts for a
: 1966-68 Hardwick Gas Stove. I need a thermo
: coupler and an oven valve.

If it is a pilot ignition model, the oven safety valve and the thermocouple are only sold as one piece. There should be no reason a replacement "safety valve" is not available, it is a popular item needing replacement.

The most common Hardwick and Magic Chef gas oven safety valve is linked below. It is the same one that was used on my 1968 Hardwick 20" freestanding gas range which needed replacing too.

Dan O.
Appliance411
The Appliance Information Site
=D~~~~~~

Common Hardwick/Magic Chef Oven Safety Valve

Re: Hardwick Gas Stove

Carol -- Tuesday, 18 September 2001, at 7:37 p.m.

Thanks, I'll see if I can order the part from there since the people up here don't seem capable or interested in helping.

Thanks again